New Zealand work gloves

Find the right glove for the job.

A focused range of work gloves for New Zealand industry, supplied through safety and trade stores.

A hand in a TGG Samurai 18 cut-resistant glove lifting a sheet of glass from a workshop bench

Compare the range

Side by side

Published EN388 results and key specifications, side by side.

Swipe sideways to see every glove — the row labels stay in place.

Comparison of the TGG glove range
GloveTheSamurai 18TheSamurai 13TheGreat WhiteTheScorpionTheHippoTheGeneral
Intended useThin 18-gauge cut protection for work that needs fingertip feel.Heavier 13-gauge cut protection for rougher, harder-wearing work.Cut protection with a full coating and textured palm for wet or damp handling.General handling with the top abrasion result for rough, abrasive materials.Micro-foam nitrile palm general handling for workshop and mechanical work.Lightweight PU-palm glove for everyday light handling, assembly and packing.
GroupCut protectionCut protectionCut protectionGeneral handlingGeneral handlingGeneral handling
Published EN388:20164X42D4X43D4X42D4131X4131X3131X
ISO 13997 cut resultCut DCut DCut DNone — not a cut-protection gloveNone — not a cut-protection gloveNone — not a cut-protection glove
Gauge18 gauge13 gauge18 gauge15 gauge15 gauge13 gauge
LinerHPPEHPPE—Corn-starch fibreNylon / spandexPolyester
CoatingMicro-foam nitrilePUDouble-dip nitrileSandy nitrileMicro-foam nitrilePU
CoveragePalm and fingertipsPalm and fingertipsFull coat — back of hand and palm, textured palmPalm and fingertipsPalm and fingertipsPalm and fingertips
ConditionsDry / WetDry / WetWetDry / WetDry / WetDry
TouchscreenTouchscreen compatibleTouchscreen compatibleTouchscreen compatibleNot statedTouchscreen compatibleNot stated
Thumb crotch reinforcementYesYesNoNoNoNo
Sizes7 – 12 (S – 3XL)7 – 12 (S – 3XL)7 – 12 (S – 3XL)7 – 12 (S – 3XL)7 – 12 (S – 3XL)7 – 12 (S – 3XL)
Pack quantity12 pairs12 pairs12 pairs12 pairs12 pairs12 pairs
Carton quantity120 pairs120 pairs120 pairs120 pairs120 pairs120 pairs
Cut result is the ISO 13997 (TDM) letter from the EN388 code. X means no performance level is declared for that test.
Gloved hand in a TGG Scorpion work glove carrying timber on site

Named for the job in front of you.

About TGG

A New Zealand glove brand, built for the job

TGG — The Glove Guys — is a New Zealand work glove brand focused on supplying high-quality gloves that are fit for purpose and built for the demands of real work.

Our range is developed around the needs of the people who use our gloves every day. We listen to feedback from end users and the trade, using it to refine existing products and identify where better solutions are needed.

From materials and fit through to grip, durability and protection, every glove in the TGG range has a job to do. We keep the range focused, practical and backed by the standards and technical information needed to choose the right glove for the task.

TGG-HIPPO · General handling · 15 gauge

TheHippo

General-purpose glove with a micro-foam nitrile palm for grip in workshops, mechanical work and warehousing.

The Hippo work glove — palm and back Pair
  • Micro-foam nitrile palm grip — A breathable micro-foam nitrile palm coating on a 15-gauge nylon / spandex liner for dry and wet workshop handling.
  • Top abrasion result — Abrasion level 4 — the maximum under EN388:2016.
  • Phone stays usable — Touchscreen-compatible fingertips.
EN388:20164131X
Cut resultNo cut rating
Gauge15 gauge
CoatingMicro-foam nitrile
ConditionsDry / Wet
TouchscreenCompatible
Sizes7 – 12
Pack12 pairs
CuffKnit wrist, size-coded overlock
Available sizes

Choose sizes to include them in your enquiry — optional.

Overview

The Hippo is the workshop general-handling glove — parts handling, mechanical work, assembly and dispatch. It carries an EN388:2016 result of 4131X, with abrasion at the top of the scale, and its fingertips work with phones and tablets. It has no ISO cut result and is not a cut-protection glove.

Where it is used

Industries

AutomotiveEngineeringMechanicalWarehousingManufacturing

Applications

Parts handlingMechanical workAssemblyWarehouse handlingPacking and dispatchPlant maintenance

Specifications

Technical specifications
Product codeTGG-HIPPO
GroupGeneral handling
Gauge15 gauge
LinerNylon / spandex
CoatingMicro-foam nitrile
Coating coveragePalm and fingertips
CuffKnit wrist, size-coded overlock
Thumb crotch reinforcementNo
TouchscreenTouchscreen compatible
ConditionsDry / Wet
Sizes7 – 12 (S – 3XL)
Pack quantity12 pairs
Carton quantity120 pairs
StandardsEN388:2016 — 4131X

Ratings

EN388:2016 — mechanical risks

4131X

Mechanical risks — no ISO 13997 cut result

4
Abrasion resistance — 4 of 4Cycles of abrasive paper before the glove wears through.
1
Coupe cut test — 1 of 5Rotating-blade cut test.
3
Tear resistance — 3 of 4Force needed to tear the material.
1
Puncture resistance — 1 of 4Force needed to push a stylus through the palm.
X
ISO 13997 cut (TDM) — no level declaredThis glove is not rated for cut hazards.

Read the code left to right: abrasion, coupe cut, tear, puncture, then the ISO 13997 cut letter. The final X means this glove has no ISO cut result and should not be chosen for cut hazards.

Also consider

Enquiries

Stockist and wholesale enquiries

TGG gloves are sold through safety and trade stores. If you would like to stock the range, tell us which gloves you are looking at and we will come back with wholesale pricing and samples.

Opens in your email app, addressed to info@thegloveguys.co.nz.